-
Add electrical rules compliance CI job. The proposed design is outlined in #1.
- [x] Add https://github.com/INTI-CMNB/KiAuto as a project submodule
```bash
git submodule add ../KiAuto utilities/KiA…
-
HDMI plug detection appears to break SOQuartz. If I comment out the plug detect check HDMI works:
Hpd = DwHdmiPhyDetect ();
DEBUG ((DEBUG_INFO, "HDMI: Plug %adetected\n", Hpd ? "" : "not …
-
doc says I have 10 seconds to send AT commands
try this and get error
```
AT UMLA=1
ERROR
```
with or without the + sign between AT and UMLA
the docs says for c209
```
The AT commands …
-
There have been release of new ifan03. It is an improved version from ifan02. Do some of you guys have it? Will there be support in tasmota?
ghost updated
2 years ago
-
Some of the larger projects that we have planned for the embedded hardware team involve developing custom processing boards for various parts of the robot. For instance, for our odometry subsystem, we…
-
Would it be possible to attach to MIC instead of pin 16 of ULA? There is a resistor and a capacitor in the middle but also on the wespi side... maybe with some wespi adaptation might be possible!
I…
-
Hi there,
i have a Dreamstream [SPA](https://m.bestwaycorp.at/Product/Detail/1060151NOX22), which has exact the same electronics like Lay Z Spa. Both selled from Bestway.
My Pump looks like the ne…
-
Add Electrical Rules Check (ERC) CI job. This job can then be run as a part of a commit or release to ensure a schematic's compliance with a project's as-configured electrical rules. The script should…
-
I'm using klipper on my Tevo Flash for 3 weeks now. I often have the error message
"Shutdown due to kill button!". I did bed mesh leveling. Z-offset is set and first layers looks perfect. But from ti…
-
Symptoms:
1. If I start bed preheating without turning the hotend on, after some time the machine reloads. Was the preheating started from the menu or from the file does not matter.
2. If I start th…
sofos updated
2 years ago