-
Could you be so nice and put a compiled bin file with pcf8574 support
in your bin folder?
I would like to test it with a 8 relay board.
Thank you very much.
-
I have one Electrodragon board with 2 (onboard) + 3 (extra) relays, so I need one more output PIN,
I didn't find any reference in the wiki about how GPIO_LED1 works.
Is it related to relay1 ?
Can…
-
Hi @arendst
I upgrade the firmware on an electrodragon 2 relay board, from 5.1.2 to 5.3.0
After Upgrade the board continuously reboot:
Exception (29):
epc1=0x4000e1b2 epc2=0x00000000 epc3=0x0000…
-
Hi. I have set my Home-Assistant configuration.yaml file as suggested in this way:
```
mqtt:
broker: 192.168.1.72
port: 1883
client_id: sonoff1
keepalive: 60
username: !secret mqtt_us…
-
Hi All,
I have a 64x32 panel which i am using to build a pixel display for my rpi3 and i tried running the hzeller code for the Panel.
I have had experience with the code base and have also creat…
-
I want to use modbus on mongoose-os.
I am using following hardware-
RS485 module using UART.
http://www.electrodragon.com/product/max485-rs-485-module-ttl-to-rs-485/
-
I have several issues with my v1.5 version of the electrodragon dual switch running 4.0.5. of this
splendid software which i compiled and uploaded using programming.io. I'm hoping if i list them some…
-
My electrodragon running 8.1.0 seems to be stuck in an upgrade loop. the following is an extract of the console log:
`21:15:16 mDNS: Query done with 0 mqtt services found
21:15:16 MQTT: Connected
…
-
i have upgraded a nodemcu, configured as Wenos, to the last firmware version.
Previously the mcu is on 5.6.1l release.
The mcu control 2 relay, after upgrade I can turn on the relay from mqtt and fr…
-
Hi,
I've just updated my S20 and new RF bridge to 5.6.1k but when I try to access the web interface I get the following error below:
```
{```
"Module":"Sonoff Basic", "Version":"5.6.1k", "Fal…
c2342 updated
7 years ago