-
Hello.
The signal that I’m working with is split into multiple binary files.
I was wonder if it’s possible to use multiple files as input for gnss-sdr.
Thank you!
-
I've been following GPSTEST for a long time, and I have to admit, this software works really well.It can show the azimuth of the satellite, the constellations tracked, signal quality,TTFF and so on. H…
-
Hi, First, thanks for this tool, I'm really looking forward to using it.
I'm able to stream data from gnss-sdr to gnss-sdr-monitor, but once a Position fix is established, the gnss-sdr-monitor wind…
-
Hi, thank you so much for publishing this work, we want to use this network for better accuracy. So we ask how to test our own collected data as we did before in TD3D network.
This is the demo test u…
-
Hello, thank you for your excellent open-source project. May I ask how the following satellite observation data is obtained?
c
uint8_t RTK_LLI[NFREQ]; // RB-SD carrier-phase cycle slip flag
uin…
-
Should GNSS be used instead of GPS. I think the answer is YES!
-
Here's a brief article on some things to look for in a "good" GNSS signal. I give examples of what a clean, fairly strong signal looks like, contrasted to a signal that's too weak to work in GNSS-SDR.…
-
Having an issue here:
~/gnss-sdr/conf$ sudo gnss-sdr --config_file=./front-end-cal.conf
Initializing GNSS-SDR v0.0.13.git-next-3daa9259e ... Please wait.
Logging will be written at "/tmp"
Use gn…
-
This appears to be related to issue #749 as a segfault for use of plutosdr, but based on the backtrace it seems like a different issue.
Using the supplied conf/RealTime_input/gnss-sdr_GPS_L1_plutos…
-
I have built test setup for RTL-SDR mentioned in GNSS-SDR's web page.
[https://gnss-sdr.org/docs/tutorials/gnss-sdr-operation-realtek-rtl2832u-usb-dongle-dvb-t-receiver/](GNSS-SDR)
I have used an …