-
Hi, I want to test minimyth2 on Orange Pi Zero 2, Can you sent me a test image, thanks!
-
Hi,
I trying to get hdmi audio using orange-pi-5.16-sunxi64 branch on orange-pi-zero2 (h616).
It not works unfortunatelly.
Looking on dmesg I see:
`sunxi-hdmi soc:hdmi-audio@1: snd_soc_register_…
-
Hello,
I've just found your image MiniMyth2-armv8-master-11.23.0.r2941-board-h616.tanix_tx6s-SD-Image.img.xz could be bootable on my tvbox - x96 mate (h616), no error on serial console.
I want to …
-
we used 5.13 patch，Everything is ok, but the temperature sensor displays abnormal.The sensor display value is fixed and has not been refreshed.We found that the driver said that a register needs to b…
-
**Feature**
Add a BUILD_ONLY compile switch as a list of partial build artifacts to perform just a partial builds like `u-boot,kernel´
The motivation for this enhancement is to simplify and shor…
-
I have an .img file that PhoneixUSB can flash to EMMC on a Rongpin H6B just fine, but if I'm using sunxi-fel to write `boot0_nand.fex` the tool complains that the SPL is too large (48kB). The `boot0_s…
-
Hello,
I just build branch orange-pi-5.13-sunxi64 @ 018ff30bec
By 6e02ada5 I assume it should offer audio support on OrangePi-Zero2 (h616)
Unfortunately audio not works.
Kernel dmesg reports:
…
-
Hi Arthur.
At the outset, I would like to thank you for your wonderful work.
I am trying to implement your software into Allwinner H616 based system.
My board (H616 - T95MAX - V4.0) uses port I b…
-
Hi, I used sunxi-fel too to communicate with V536 based CPU but seems it's not fully supported as I'm getting:
```
sudo ./sunxi-fel spiflash-info
Warning: no 'soc_sram_info' data for your SoC (id=…
-
Hello,
I'm compiling linux kernel 5.15 for x96 mate tvbox from this branch https://github.com/jernejsk/linux-1/tree/h616-full
It booted, but can not find eth, as I can see that branch was patched …