-
LopY 1.7.8.b1
This type of crash blocks the device.
Simple to reproduce. Type in console:
a= 0xaabbccdd
a.to_bytes(4)
b'\xdd\xcc\xbb\xaa'
import ustruct
ustruct.pack('4b',a)
Guru M…
-
Hi
I get ValueError 868100000 on startup but nanogateway is connecting to ttn . If I change value LORA_FREQUENCY = 903900000 there is no error .
-
I'm not able to use the pytrack sensors (the board communicates fine through USB) with either of the fipy or gpy boards that I have. When I try to access a sensor on the Pytrack, whether it's the GPS …
-
Does ethercard support IPV6? As far as I know the ENC28J60 is one of the only Arduino boards that supports IPV6. When I look at a sent UDP packet using Wireshark the packet has an IPV6 header then a…
-
hello
being using the exemple file stated above the node don't connect in otaa mode using another lopy as a gateway...
it keeps on saying not joined yet. i try the otaa node code with another ttn ga…
-
Hi,
I implemented the LoRaWan nanogateway. It works but keeps crashing and restarting at intervals with the following error message after what looks like a long hex dump.
`Guru Meditation Error…
-
Hi,
Is there a working example for interaction with the Things Network using AS923?
I have 2 LoPys with each acting as an OTAA node and a nano gateway node respectively.
I modified the followin…
-
The socket module included with the Wipy 3.0 firmware does not expose port specific constants the way other micropython ports are exposing them.
This is an issue when trying to use a micropython mo…
-
Hi there
I need to use all EU868 channels but I don't know how to handle them
My lopy is set as follow and with OTAA
![image](https://user-images.githubusercontent.com/2471931/40498150-8152a992-5…
-
[configuration.yaml.txt](https://github.com/home-assistant/home-assistant/files/1627326/configuration.yaml.txt)
[automations.yaml.txt](https://github.com/home-assistant/home-assistant/files/1627327…