-
### Category
Other
### Hardware
Not Applicable
### Firmware Version
1.3.6
### Description
nodes should but are not rebroadcasting packets without a valid PSK to decode the payload.
### Relev…
-
Add the ability to make the node reboot after a certain period every time. So you could do a meshtastic --set reboot_after_secs 86400 and it will reboot every 24 hrs.
Probably need to hard code a …
-
### Category
Serial
### Hardware
T-Beam
### Firmware Version
1.2.59.d81c1c0
### Description
The tbeam v1.1 M8 was programmed via python. Then after the programming was completed I visited clien…
rwcts updated
2 years ago
-
I got the RAK5005-O working, but when I plug it into my computer via USB and try to run any command with the meshtastic python program, it always returns with a connection timed out error. I installed…
-
For my gateway node, I currently modify the code to publish decrypted protobufs to MQTT, then have a python script on my RPi that translates to other formats (eg raw number MQTT publish for battery %,…
-
Hello Meshtastic community!
Today I installed the Meshtastic Flasher (version v1.0.103) on my MacBook Pro (MacOs Mojave - 10.1.4.6).
When trying to flash Mashtastic on my T-Beam (which I just got d…
-
Meshtastic-python 1.3.a11 don't use a good value to get or set the canned messagess
**Test with last firmware version 1.3.5.59**
./run.sh --info
Owner: Unknown 620c (?0C)
My info: { "myNodeNum":…
-
### Category
Other
### Hardware
Heltec v2.1
### Firmware Version
1.3.4.2b20bf3
### Description
The Heltec Lora 32 v.2.1 devices was loaded with the alpha version 1.3.4.2b20bf3 and on the second…
rwcts updated
2 years ago
-
Meshtastic-python 1.3.a11 don't use a good value to get or set the canned messagess
Test with last firmware version 1.3.5.59
./run.sh --info
Owner: Unknown 620c (?0C)
My info: { "myNodeNum": 633…
-
add ability to set a fixed position (latitude, longitude, altitude)
Can leverage the `meshtastic` library and call it via CLI or API:
interface.sendPosition()
https://github.com/meshtastic/Me…