-
Hello embedded Rustaceans!
We are collecting a "wishlist" of things you'd like to see done, fixed or
stabilized in 2019. We'll use this data to make a roadmap for 2019, i.e. to set
the goals of t…
-
We are looking to hire an Embedded Systems Engineer within our Fluid and Metering Technologies division. Our various product platforms include meters and systems that move, measure and manage high val…
-
### Problem Description
I have a problem to generate/verify ECDSA signature (mechanism ECDSA-SHA1).
I want to sign the file with pkcs11-tool - to get the same result as with openssl:
### Propos…
-
## Introduction
Disclaimer: I am a beginner with Zephyr so please don't be offended if I have the wrong end of the stick in some areas.
Add a new emulator framework which allows integrated testi…
sjg20 updated
4 years ago
-
-
what if I am using px4? I do not have Qualcomm Snapdragon
-
Hello @terjeio ,
As I now finished my machine which has two motors for the Y-Axis, I start thinking about the possibility of squaring the gantry while Homing.
Do you think this would in the futur…
-
Hello Everyone
I wish desperately to install Slic3r, Printrun and Octoprint on Raspbian, but impossible to install Slic3r Pe .
I followed the instructions of this link: [How to install Slic3r on RPi…
-
Maybe it's a problem, now I have an alternative solution but I leave the restlessness.
https://forum.xod.io/t/different-result-simulation-vs-debug/3384
-
I have had a quick look at some 64x64 P2.5 panels and discovered there is an additional decode line 'E' on the HUB75 interface. This is pin 8, which is currently pulled to ground on the Raspberry Pi …