-
P1 meters in the Netherlands do not report a total consumption or production but this is split into
Consumption low
Consumption high
Production low
Production high
therefore only being able …
-
**Describe the problem you have/What new integration you would like**
I have a energy meter installed in my house that exposes its data via M-Bus. I would like to see support for reading values o…
poear updated
2 months ago
-
## *Lab/Experiment(s) Hosting Request*
Use this issue to get your lab and experiment repositories hosted on Virtual Labs. This issue also is used to host labs and their experiments that have been mig…
-
A 4-player FFA minigame where each player fights to collect fuel cells and refuel their spaceship.
---
## Required
- [x] Throwing charge meter to increase velocity
- [x] Thrown fuel objects t…
-
### Is your feature request related to a problem? Please describe.
I use Tibber and here it is connected wireless between gateway and SmartMeter-Pulse. The Pulse have a battery inside. If too many …
-
The thresholds today have two roles. They act as hysteresis plus they adjust the operating point. The hysteresis function is *also* covered by the PV mode enable/disable timers. With https://github.co…
andig updated
1 month ago
-
With the headless version now available, all commands previously available via buttons are now remote serial port commands. Additionally CPU reset, Cal table dump, and upload a cal value are added. …
-
The idea is that this device is a piece of test equipment, not needed for full time use. A club could have one for everyone to use to help them adjust their mic levels. Then, once adjusted, remove i…
-
**Feature request switch boost charging Alfen in HA**
I don't know if there is already a back office key for it.
I have the latest firmware version 7.0. 2-4322.
Charging on the generated p…
-
Hi! thanks for sharing this project. I tried using it with my SolarEdge inverter but no meter values came back.
Here's the output with debug enabled:
```
12:38 $ ./SolarEdge-Exporter
12:38PM …