-
Hi,
how about enter CMUX mode, leave it, and enter it again ?
should work ?
i tested it on a SIM7070 and it seems not working.
[log1.txt](https://github.com/espressif/esp-protocols/fil…
-
we follow https://github.com/espressif/esp-iot-solution/tree/usb/add_usb_solutions/examples/usb/usb_cdc_4g_module project, build pass,
we connect CAT.1 device(EC600S-CN), but the AT fails
err…
-
Hi,
When running on CMUX example code after getting IP we can observe a user interrupt error
```
I (39639) esp-netif_lwip-ppp: Connected
I (39639) esp-netif_lwip-ppp: Name Server1: 10.95.83.1
I (…
-
Any chance of adding another datatype: "LEVEL_T" which can be used for sending a water reservoir level?
-
Hello I bought a Lilygo T-SIMCAM module and wanted to start with the example sketch **pic2cloud** without mPCIE card mounted.
After uploading the sketch the ESP throws errors in a loop. I also trie…
-
Hi, I'm currently doing research on vehicle telematics and I found that this project has amazing hardware that I can use for my research. However, I am more familiar with the Arduino framework and it'…
-
Work on master branch
"gateway/priv_src" directory not found
But this directory is mentioned in "CMakeLists.txt" file
I need to use the "gateway_eth.c" file in this directory
components\gateway\…
-
Is there an example for the implementation of the MqttClient::Network class for a SIM chip with AT commands (any SIM7600, or SIM800)?
What exactly does the functions read and write have to do?
-
Is esp-modem supports usb interface to connect with 4G modem using PPP for ESP32-S3 device
-
Hi,
the simcom module is set to turn on automatically when the board wakes up from deep sleep. This is inconvenient, since I do not need the modem to turn on every time the board wakes up from sle…