-
Getting this error in of kh.cpp file.
File `external/Kokkos/core/src/setup/Kokkos_Setup_Cuda.hpp`
```cpp
#if defined(KOKKOS_ENABLE_CUDA) && !defined(__CUDACC__)
#error \
"KOKKOS_ENABLE_C…
-
Shall we also putting the code for presets in ZHAs `climate.py` here so user can getting all i one place and not need jumping around all the github for finding the right one for ther TRVs ?
Perhaps o…
-
From the IRSG review by Dave Oran:
> In the definition of “Path”, the second paragraph says “Paths are unidirectional and time-dependent, i.e., the sequence of path elements over which packets are …
-
### What happened?
When switching from manual to programming mode (sending payload "preset": "programming") current_heating_temperature do not change/update to the scheduled temperature in the zigbee…
-
### Prerequisites
* [ ] Model name of your Devices: TS0601 | _TZE200_bvu2wnxz
* [ ] Output from Home Assistant Developer Tools state e.g.
hvac_modes: auto, heat, off
min_temp: 5
max_temp: 35
…
-
**Is your feature request related to a problem? Please describe.**
I bought this thermostat from AliExpress. It's possible to pair with ZHA, but no entities are exposed.
**Describe the solution yo…
-
Is there a chance to get support for the "new" device Shelly-TRV?
-
I was looking for SEA801/802 similar and found some which appear to be such a TVR [https://www.kaufland.de/product/445477868/?vid=445477975](url) .
But it is a ME167 which is not straight supported b…
-
### Prerequisites
* TV02-Zigbee (Moes TV01-ZB)
* Connected via zigbee2mqtt (separate Docker-Container, no HA Add-on)
* Discovered in HA via MQTT integration
### Description
The TRV always…
-
Hi and thank you for the nice project.
I'm using an DIY opentherm thermostat and setup it in HA as below:
`- platform: mqtt
modes:
- "off"
- "heat"
name: "OpenTherm Thermostat"
…