-
Any chance someone could fix the compiler warning `:0:10: warning: ISO C99 requires whitespace after the macro name` that occurs on EVERY file? There's also a few other warnings thrown out, but I'm no…
-
Well, in the website it shows NULL, but in the code it shows 0.
`#define TWATCH_TFT_MISO (gpio_num_t)0`
![pic](https://0.rc.xiniu.com/g3/M00/41/01/CgAH6F6mS4GAewwUAASjMb2j3AU249.jpg)
-
I get this error on compiling;
Arduino:1.8.13 (Windows Store 1.8.42.0) (Windows 10), Kort:"TTGO T-Watch, Enabled, Default (2 x 6.5 MB app, 3.6 MB SPIFFS), 115200, None"
sketch\gui.cpp: In member f…
-
### Hardware:
Board: ESP32-WROOM-32 Dev Module
Core Installation version: 1.0.1 (installed using board manager feb/23)
IDE name: Arduino IDE 1.88
CPU Frequency: 80MHz
Flash Fre…
-
Bonjour ,
could someone do that?
thanks in advance
Regards
-
There are a lot of mentions of RTC_INT in the code, but it's not defined anywhere. Which gpio is it?
```
exit status 1
'RTC_INT' was not declared in this scope
```
```pinMode(RTC_INT, INPUT_PUL…
-
Hello, I've writen an app for T-Watch-2020 which works flawlessly.
When I flashed it over another T-Watch-2020 I got this error:
`[esp32-hal-i2c.c:1130] i2cProcQueue(): Bus busy, reinit`
Whenev…
-
Can the author update data for their latest watch model?
If the hardware, pin map for 2020 is exactly the same as previous models, please confirm in your README.MD. I don't think it's exactly the s…
jhfoo updated
4 years ago
-
I note you have 2 firmware repos for the same TTgo 2020 watch. Can you help me understand what's the difference in the use case between them?
Ref: https://github.com/OPHoperHPO/lilygo-ttgo-twatch-2…
jhfoo updated
4 years ago
-
我试过tft->drawString("你好", 0, 0);但是屏幕无输出