-
# Bug report
## Describe the bug
Add a description of the bug. Detail the expected behavior in contrast with the behavior you're observing.
## Additional information
- used Hardware:
- …
-
Hi, after the update was released I uploaded it via the web interface and the LEDs don't light up, if I upload the older FW the LEDs light up again and it works without any problems. Was there any cha…
-
# Bug report
## Describe the bug
Updated my TC001 today because of the „stuck in AP mode“ issue, but my clock just stopped scrolling/working 10minutes ago.
I kicked it from the wifi and it …
-
# Bug report
Dots of the clock app don't flash after changing the config with MQTT.
## Describe the bug
The dots separator between hours and minutes of the default clock app used to blink…
-
# Bug report
Unexpected WiFi behaviour after lost connection (version 0.86 Bugfix)
## Describe the bug
WiFi is switched off in parts of our house during night time so the Ulanzi clock is without c…
-
# Bug report
## Describe the bug
switch not is case-sensitive
## Additional information
- Devices involved:
- Model: Ulanzi Awtrix Smart Pixel Clock 2882 (TC001)
- AWTRIX-LIGHT ver…
-
i update to the latest firmware today and on reboot en reenter the mqqt i only get a blank screen when data is send from home assistant to the clock.
before the update i could send in a automation ev…
-
# Bug report
## Describe the bug
after changing the values for hum and/or temp compensation and saving / rebooting, nothing changed.
it doesnt matter if i edit the json file or use the brow…
-
# Bug report
## Describe the bug
So I have couple of humidity sensors in my home, and the Ulanzi's is quite off (10+ %). I know I can disable it and show a different sensor's output on the s…
-
# Bug report
Awtrix with Ulanzi permanent reboot
## Describe the bug
After install the 0.73 Version every thing looks fine.
If i add the MQTT-Field (correctly) without the Home-Assistant …