-
-
Hi,
I followed both websites:
https://docs.px4.io/en/flight_controller/intel_aero.html
GitHub - intel-aero/aero-optical-flow
please see version in picture attached.
please also see "Optical f…
-
I recently added a SR04 distance sensor to a Sonoff basic, and it seems to work ok the first couple of minutes.
After about 5 minutes the readout is 283cm, and it gets stuck to that value.
If I rest…
-
I have a use case where I would like to replace and old serial data radio with and esp8266 device using mqtt
It is not contious data stream, just a simple 8-16 chars every 60 seconds of so. So mqtt wo…
-
Good Morning @JJOCEAN1,
Following the discussion from yesterday, I do a summary about your doubt. In your project, you require to store in disk, information from a LIDAR sensor in this case from `R…
-
Hi,
Is it possible to prepare ease set deepsleep mode for battery saving as it is developed in:
https://www.losant.com/blog/making-the-esp8266-low-powered-with-deep-sleep
I would like to do…
-
Hi,
First of all thank you for your work that's really helpful.
I would like my Bebop Power 2 to take off at 2 meters from the ground.
Is there a simpler way to do that than playing with the vertic…
-
Specifically battery voltage and DC?
What is needed to add these
nezra updated
6 years ago
-
Hi
is it posible to to use the hc-sr04 sensor with the badgerboard?
Thanks
-
During picademy today we had an issue with a couple of ultrasonic distance sensors - they seemed to return 19-20cm no matter what (or 0 when the target was particularly close). Failed to debug the iss…