-
After normal Pi5 update Adapter is not working anymore. Any ideas ?
Installierte Version:
3.1.0
jscontroller:
6.0.11
Plattform:
linux
Betriebssystem:
linux
Architektur:
arm64
Geschwindig…
-
I was building this for my SteamDeck and noticed that during compiling, it was building things like drivers for Wifi Chipsets the Steamdeck doesn't have, as well as things like Nouveau.
Would it ma…
-
The original design for Anachro had multiple SPI lines, which was better suited for the nRF52's muxable pins. For Stargazer, I've ended up using a single shared SPI bus, which means that flexibility m…
-
Within `cp2130_spi_transfer_one_msg()`, there are 5 calls to `usb_bulk_msg()`. `&len` is passed as the `acutal_length` output parameter, but the value is never checked. I believe the driver should b…
-
## Environment
- Development Kit: [ESP32-S3-WROOM-1]
- IDF version (run ``git describe --tags`` to find it):
// v3.2-dev-1148-g96cd3b75c
- Build System: [idf.py]
- Compiler v…
-
请填写以下信息.
Please fill in the following information.
Install ENV: (You can find it in the boot interface.)
* DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS …
-
Hi,
I'm trying to upload your sample yaml to a M5StickC from HA ESPHome integration, but is giving me an error on compile time with st7735.h.
Here's a log of a compilation
> CONFIGURATION: https:…
-
Hi folks,
I made an adapter PCB that puts two Adafruit QTPy boards back-to back and connects the UART, SPI and I2C lines (plus power and ground). Happy to share the Eagle files when it's working (…
binko updated
2 years ago
-
**Describe the bug**
Built and ran the usb mass storage demo with zephyr v3.2.0 on mimxrt595_evk_cm33, wait for 30 seconds to usb msc can mount to PC.
**To Reproduce**
Steps to reproduce the beha…
-
I just got couple of Metro M7 both SD and Airlift models.
Since the Metro M4 boards already added, perhaps adding the M7 boards shouldn't be much of an issue?
I can provide any information that is r…