-
After the latest update/upgrade of Firgate and the integration I am experiencing a 6 to 7 second delay in opening a stream when selecting one of the cameras. I have Frigate setup in docker and use Go2…
-
### Describe the problem you are having
Really the screenshots should be 1 single event but they are being split up into shorter sections of 3.
3x of the same object detected in same time frame fr…
-
![Bildschirmfoto 2023-11-14 um 16 10 04](https://github.com/blakeblackshear/frigate/assets/46754347/9ca8e869-dcec-4180-8062-13593da41b75)
### Describe the problem you are having
I recently upgra…
-
### Describe the problem you are having
One of my cameras is not detecting cats. I just wondered if this is normal? or if my config is causing issues.
### Version
0.12.1-367D724
### Frigate co…
-
### Describe the problem you are having
Please could I get some tips on how to tune for v13?
Noticing getting about 10 events for the same time frame.
Modelling seems different compared to v12 …
-
Jarvis 3.0.11
Hallo, ich lasse Snapshots von 6 IP Cams über Jarvis DisplayImage anzeigen. Fünf davon funktionieren einwandfrei. Bei der Wansview Q6 zeigt mir der Chrome und der Edge Browser nur ein s…
-
### Describe the problem you are having
Have been sending images to frigate+ but when I log in they are showing as blank and showing text
My account is hello@skynique.co.uk
https://imgur.com/a/…
-
### Describe the problem you are having
I have 2 cameras on each side of a gate. The low down one 100% detects cats every time as they crawl under the gate.
However the camera on the drive doesn't r…
-
### Describe the problem you are having
Am noticing past few days sometimes video is shown as black with only audio.
Specifically on bird cam.
It seems to be corrupting somewhere.
If you downlo…
-
I have 4 cameras with this hardware here, and they are basically useless with the original firmware they have.
Is there anything I can do to help accelerate the development for supporting Ingenic T…