-
hi
i tried to implement the rdy pin on an ads1115 but it only worked half the time and depended on input voltages on the adc.
this made me suspicious that it might not work as a ready pin but as …
-
When I change the lib_deps path from SignalK/SensESP to https://github.com/SignalK/SensESP.git#latest it doesn't seem to give me the proper version. Most notably, the ads1x15 code is missing.
I am…
-
### The issue
Problem: The ALERT/RDY pin triggers without apparent cause.
Tested with ADS1015 (ADS111x has same config register fields with ADS1114 and ADS1115).
The problem is located into the tw…
-
Using the Arp Axxe to control the Ekdahl FAR makes for a giant lag when using the V/OCT input and possibly the tune input too?
-
Hi,
I've made it on a nodeMCU board,
It works good but having 22kohm res i have to power it with 3.3v.
If I do with 5v as documented temp goes out of reasonable range.
Makes sense or I'm doing s…
-
Not a major issue but...
1. add the 1-wire interface to REM
2. go to the 1-wire device list
3. name each DS18B20 device and save it
4. save settings on main panel
5. note that probe names are l…
-
Not correct function of serialization of configure type struct to byte array.
```
static void prepareConfigFrame(uint8_t *pOutFrame, ADS1115_Config_t config){
pOutFrame[0] = 0x01;
pOutFrame[1]…
-
My TX (Horus and also Taranis) could not find OXS Sensor in Sensor Discovery when I plug them into my X6R (tried also another X6R). I pulled the latest Master branch and also tried various other tagge…
labeh updated
2 years ago
-
Hi
I tested with Spektrum DX9 and AR9030T and I get no telemetry values. FV shows baro but, I get no data. The reciever and stuff works, because with spektrum sensors, all works
-
I installed Raspbian-OpenFlexure system on my RPi 3, I installed required repo for ADC with pip.
Then I've downloaded [example extension folder](https://gitlab.com/openflexure/microscope-extensions/e…