-
Content warning: if you're uncomfortable with strong language, especially when used in the context of speaking out against racists and fascists, you should stop reading now. (You'd also be best advise…
-
With [latest RCBugFix](https://github.com/MarlinFirmware/Marlin/commit/415294801f613e88779c0b2bb57e83767bb595cb), I realized that displaying of SD Card section looks like broken.
folder tree:
```
…
ghost updated
2 years ago
-
Hi,
This is a request for assistance and possibly a bug report. I'm still very new to Marlin and not sure where to look to debug this issue to help further. I'm hoping that the information provide…
-
Hi I am trying to find out if Klipper could do Torch Height Controlling movement for a cnc plasma table.
The plasma cutter sends up and down commands based on the Arc voltage so I am trying to find…
-
When I set `QUICK_HOME` it will run BUT it crashes into the stops.
If I home each axis individually the endstops work fine.
I think I had one config that worked but I can't find it.
This is a CoreXY s…
ruggb updated
2 years ago
-
I'm running the latest RCBugFix, I've just modified my printer to use dual stepper drivers for the Z axis (I had problems with one side of the axis drifting over time with the single driver for both).…
-
With the dual x-carriage, the tools can have a different Z since they move independently (not in duplication mode). I would like to request a feature that enables Z (and maybe also Y) offset right aft…
-
I cloned RC6 and then used a diff tool to carefully copy over only the relevant configs from my RC3 Configuration.h to the RC6 Configuration.h and uploaded to the arduino board on the printer (using A…
-
I had a discussion recently about the tool offset and switching tool and got a feature introduced so a tool switch can be done with out moving but as for today's RCBugFix I can't get the machine to re…
-
Hello. After G29 command not working raise between probing points. I don't understand why or what wrong I do?
Marlin 1.1.0-RC7
This is my configuration.h:
``` cpp
#include
/**
* Marlin 3D Pr…