-
Add an example showing how to use avr-hal without a board like Arduino Uno but with an MCU in a circuit on a custom pcb, a breadboard or a dead bug.
-
I am getting acquainted with inav on the H743 circuit board from weact, and am having problems receiving gyro (BMI160). I tried with the servo on motor 1 with the default settings and the servo vibrat…
-
```
We need a more informative error message for:
avrdude: stk500_getsync(): not in sync: resp=0x30
I get at least one request a week for what this means, from beginners. It's
usually one of sever…
-
```
We need a more informative error message for:
avrdude: stk500_getsync(): not in sync: resp=0x30
I get at least one request a week for what this means, from beginners. It's
usually one of sever…
-
### Related Problem
_No response_
### The Elevator Pitch
The NuGet landing page has served users well over the years, however there are a number of enhancements that could make it more friendly to …
-
I would like to make a board for this circuit. I could make one from the schematic but was wondering if you had them available?
Thanks!
-
Lab notes about adding power measurement circuitry in the the latest [power supply](https://github.com/racklet/electronics-prototyping/tree/hat-psu/hat-psu/LMR14050SDDA_reference) board.
Some old n…
-
Hi All,
I make a board use CC1310F128RHB, this board has one LED connect to DIO3,
I modifie in contiki/platform/srf06-cc26xx/launchpad
#define BOARD_IOID_LED_1 IOID_3
I use example rpl-…
-
Built and Program are all OK, while there was nothing in Data Visualizer. I used PIC18F57Q43 Curiosity Nano board.
snapshot: https://ibb.co/rc3Znsd
circuit photo: https://ibb.co/d7zckcH
-
```
I use display: LCD-AG-C240064A-DIW
http://www.artronic.com.pl/pdf/pl/AGG240064A04-DIW-R.pdf
I connect all pins buy spec in datasheet.
When the display flashes twice and then do not show anything…