-
I was dragging and dropping between two codeplugs (which, btw thank you, that is awesome) and I found some which wouldn't work. Just quietly did nothing. I eventually figured out that the Scan List …
-
```
$ ./dmrconfig -c device.img device.conf
Read codeplug from file 'device.img'.
Last Programmed Date: 2018-09-12 15:11:57
CPS Software Version: V01.06
Read configuration from file 'device.conf…
-
Using macOS High Sierra 10.13.6, when I read my radio:
```
$ dmrconfig -r
Connect to TYT MD-380.
Read device: ######## done.
Last Programmed Date: 2018-11-02 23:49:27
CPS Software Version: V01…
-
Calling `md380-dfu write codeplug.rdt` with a codeplug larger than 262709 bytes, or without the magic 'DfuSe' uploads the codeplug as raw bytes - result is a corrupt codeplug on the radio.
To repro…
-
I do not currently see how to set the keypad tones on/off in editcp. It does maintain the setting from the radio when read from the radio, but if I turn them on the radio, read from it, then keep usi…
-
Hi all,
Although the "promiscuous" parameter is set to "disabled" the traffic on the TS1 can be heard regardless of the TG programmed on the channel. ( ie TS1 TG208 can be heard on TS1 TG6 ...)
I'm …
f5bcb updated
6 years ago
-
While I'm easily able to decode a version 12 code plug I've been getting an error while trying this with a version 13 code plug.
Archive type is Matrix
Q:\codeplug-prepare>codeplug decode kk.ctb…
-
You could use the utility (windows exe) by G4ELM that does Codeplug.dat spreadsheets (csv) e.g. Zones.csv, Channels.csv, Contacts.csv, and Groups.csv
Then you can put the csv speadsheets in github…
-
Experimental Firmware
-
So if I leave my MD-380 or MD-390 alone on the table, after about 20-30 minutes it will mysteriously reboot itself.
Running the firmware on it compiled from the latest source.
Possible memory leak? …
iball updated
5 years ago