-
Suggested by @ManiAkasapu
We need a way of storing the cabs used to allow quick switching without the address needing to be used each time.
We also need a way to switch quickly between cabs witho…
-
This feedback comes from Gil Fuchs:
In line 115, the definition of speaker impedance cannot be left to manufacturers, as the standard should be binding for both the locomotive/main board manufactur…
-
A user has reported Error 302 "programmer busy" when attempting to read Indexed CVs with a DCS240.
https://groups.yahoo.com/neo/groups/jmriusers/conversations/topics/136143
https://groups.yahoo.com/…
dheap updated
3 years ago
-
I have been trying to set up merg acc5 dcc decoder and it won't program on programming track..on any setting has anyone got any ideas.
-
There are DCC packets of up to ten bytes of data. For example the CV XPOM command. The original code does not handle
such large packets. I have adapted the "loadDccPacket" routine to generate the bit…
-
Hi,
sorry but I am wondering what's needed in order to make turnouts work?
I am using these devices: http://www.fucik.name/masinky/MP1/
but it seems no matter what I do the device doesn't try to …
-
ESP32CommandStation crashes when powering on the track. No train is on the track.
ESP32 Uno board with aliexpress arduino motorboard shield
stack:
```
0x4014e4e9: sys_sem_signal at C:\Users\..…
-
@devel-bobm raised points in the discussion for #4870:
> For example, in my work with LocoNet throttles, I've found that, in the "big scheme of things", there can be more than one "higher-level" JM…
-
17:08:48.433 -> ESP32 Command Station v1.5.0 (v1.5.0-alpha3-13-g1e4fb03) starting up...
17:08:48.440 -> Compiled on Sep 3 2020 11:21:47 using IDF v4.1
17:08:48.440 -> Running from: ota_0
17:08:48.…
-
On Loconet systems long addresses up to 16383 are valid for stationary decoders. In JMRI 4.8 doing an Ops Mode Read of CV2 on a Loconet stationary decoder at address 16001 produces the following inco…