-
## Describe your problem
When the Betaflight background script runs on the remote, only half of the RC packets are transmitted.
## Reproduction
Run Background script and count the packets. Either…
-
## Current Behavior
While flying models I noticed, that sometimes the Model Match ID is forgotten on receiver. Happened with 3 different receivers.
## Steps to Reproduce
Don't have steps to r…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
Phantom RPM …
-
I request that the following data is removed from The Stack and StackOverflow:
- Commits
- GitHub issue
- StackOverflow: jitter
- gretel/ExpressLRS
- gretel/MIDIsync
- gretel/OpenSMTPD
…
-
I would like to move my helicopter fleet over to ELRS. While ELRS's standout features of range and command rate do not necessarily apply to LOS helicopters, there are still plenty of problems with exi…
-
The current CRSF / ELRS is very limited for helicopter use.
An alternative should be considered how to pass telemetry sensors to the Tx.
One option is to use the "Ardupilot FrSky telemetry passthr…
-
Hello everyone. Thanks for the great work with ELRS.
I have bought for a couple of weeks a [Flysky Paladin PL18](https://www.flysky-cn.com/pl181englishzj). The handset is great. It is really like…
-
TW X14, Ethos 1.5.6, ExpressLRS module and the most actual ELRS lua script
For the three logs below I drove the same route for comparison.
Using a GPS module on my X14 with ELRS module / ELRS r…
-
### SOC
ESP32
### Lora IC
SX1276
### Product Link
https://www.radiomasterrc.com/products/bandit-nano-expresslrs-rf-module
### Description
Being a drone racer, I've always wondered…
-
## Current Behavior
When using **Generic ESP8285 Full-duplex 2.4GHz RX as TX** as the transmitter module, It takes about 1 minute to connect to the receiver for the first time after turning on the …