-
Has anyone tried using this library with the new Raspberry Pi Pico and its new RP2040 chip? It seems like it should be easy, but since I have only personally used the RF24 library inside the Arduino e…
-
Hey I’m sorry if this is repetitive or not relevant but I have looked everywhere to no avail to get this to work, I figured you might be able to point me in the right direction. Essentially I want to …
-
If ASICs are going to be a recurring problem, can you change the POW to maybe 5 or 10 different options every block based on the hash value of the previous block? That way the software could be change…
-
with the new version of jyers the nozzle temps extremely fluctuating between 190 -210 by an setted tem of 200.
i have done a pid tunnig , its done ok but after saving the fluctuating nozzle temp also…
-
I have a Raspberry Pi 3 with the last core reserved for this library as stated in the instructions. I am trying to control a 128x64 pixel matrix comprised of two parallel chains of 32x32 matrices. I a…
-
Hi, my setup is almst done (missing frame pieces), but i can adapt the ectronics to the machine
what is the minimun requirements (inputs/outputs) for this project?, (a Fysetc AIOII https://github.c…
-
I only need a few stations triggered by relays. I compiled 2.1.8 OS 3.0 unified firmware on my own esp8266 with a PCF8574. I had edited the defines.h, added the address of the PCF8574 and moved the…
-
I have been receiving some reports that the gamepad library and the _pew library don't work reliable on SAMD21 on 6.x. I suspect it's related to changes around the system tick. I didn't have time to i…
-
There is a board on ESP32. Compiled the firmware based on Marlin 2.0.9 and Esp3dlib. But there is no connection between the WEB interface and the firmware. A similar GR BL firmware works on this boar…
-
Hi Jens,
I noticed that there is serious performance regression using sockets with io_uring starting from v5.7.16.
Unfortunately, it continues into 5.8 and 5.9 I have not checked yet for which pat…