-
Does ethercard support IPV6? As far as I know the ENC28J60 is one of the only Arduino boards that supports IPV6. When I look at a sent UDP packet using Wireshark the packet has an IPV6 header then a…
-
Hi,
I implemented the LoRaWan nanogateway. It works but keeps crashing and restarting at intervals with the following error message after what looks like a long hex dump.
`Guru Meditation Error…
-
Hi,
Is there a working example for interaction with the Things Network using AS923?
I have 2 LoPys with each acting as an OTAA node and a nano gateway node respectively.
I modified the followin…
-
Hi there
I need to use all EU868 channels but I don't know how to handle them
My lopy is set as follow and with OTAA
![image](https://user-images.githubusercontent.com/2471931/40498150-8152a992-5…
-
The socket module included with the Wipy 3.0 firmware does not expose port specific constants the way other micropython ports are exposing them.
This is an issue when trying to use a micropython mo…
-
[configuration.yaml.txt](https://github.com/home-assistant/home-assistant/files/1627326/configuration.yaml.txt)
[automations.yaml.txt](https://github.com/home-assistant/home-assistant/files/1627327…
-
Hi,
I'm using this code on a LoPy and it seems to work well, other than that the pressure reading is too high. I'm consistently seeing readings around 21mb higher than they should be (eg currently …
-
Just trying to execute main.py :
```""" LoPy LoRaWAN Nano Gateway example usage """
import config
from nanogateway import NanoGateway
if __name__ == '__main__':
nanogw = NanoGateway(
…
-
When running the basic example, in the import statement:
`from microWebSrv import MicroWebSrv`
I get the following exception:
`MemoryError: memory allocation failed, allocating 56 bytes`
Accor…
-
configuration:
LoPy1, with V1.17.0.b1, modified to call mp_hal_us() in ticks_us() and the sx127x drivers.
Aurel GP868 antenna.
I run the gateway since about two weeks. It crashes after a while, som…