-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-concentratord) of this repository and believe that this is not a dup…
-
Is it possible to publish the source for the Arduino firmware images? Some might need modification for different regions of the world.
-
#### Summary
Device manufacturers need to have control of selecting MACSettings while adding a device in the device repository.
Refs [#263](https://github.com/TheThingsNetwork/lorawan-stack/issues/2…
-
Hello! I use WiFi LoRa 32 (V2). I modified the OTAA_OLED example for the US 915 range (Comissioning.h: LORAWAN_DEVICE_EUI, LORAWAN_APPLICATION_EUI, LORAWAN_APPLICATION_KEY; LoRaMac-definitions.h: USE_…
-
Hello,
First of all thank you so much for this library to be available for everyone!
I use T-Deck plus (with SC126x radio) in combination with Helium-IoT Console and see that I receive a JoinReque…
-
**Summary:**
Retry downlink on Tx failure.
**Why do we need this?**
To perform a best-effort of (un)confirmed downlink.
**What is already there? What do you see now?**
The GS sch…
-
#### Summary
Support downstream resending traffic out-of-order
Replaces https://github.com/TheThingsIndustries/lorawan-stack/issues/2114
#### Why do we need this?
For processing (a…
-
Hello All,
I have built my LoRaWan gateway as per instruction [From zero to LoRaWAN in a weekend](https://github.com/ttn-zh/ic880a-gateway/wiki)
The gateway works perfectly fine. The issue that …
mbruj updated
3 years ago
-
The maximum payload size in LoRaWAN depends on the current data rate. When using ADR, the data rate may be set by the network server. How do I get the current data rate or the corresponding payload si…
-
Hi again,
I'm trying to run the ttn-otaa.ino from the latest github mainline code.
My problem seems to be a recurent one but the solutions provided didn't work. Here what i got on the terminal : …