-
We'd like people to be able to reprogram their MicroFlo-based devices from desktops/laptop but also mobile devices (primarily tablets, but also mobile phones) . These cannot really build the firmware …
-
Hi, everybody.
I am working on new version of [Universal Unipolar Stepper Controller](https://github.com/IRNAS/UniversalUnipolarStepperController), and I want to port GRBL to new ARM platform. These …
-
This code should show D0 and B7 Lit on Board 4 - PICGenios
;Start of the main program
;test dir
;
;PortD = 0b00000001 ; Initial LED Pattern
movlw 1
movwf PORTD
;PortB = 0b10000000 …
-
First of all, I'm very impressed with **_Digital_** and would like to adopt it for use in some of my work.
I've updated the IEEE/ANSI shapes to look closer to the IEEE standard shapes. See below.…
-
**Edit: for easy reference, the proposed new API is at https://github.com/micropython/micropython/wiki/Hardware-API**
Since we have the WiPy TODO list (#1425) Damien and I spent some time today discu…
-
---
Author Name: **Martin Hochwallner** (@marthoch)
Original Redmine Issue: 1333, https://flumes.iei.liu.se/redmine/issues/1333
Original Date: 2014/10/09
---
http://www.mechatronic-simulation.org…
-
I've been inspired to refresh Moppy a bit and incorporate a lot of the features people want / have had to build themselves, but I want to keep things simple so that first-time users can get started as…
-
I'm not sure of future for the trait, but I found myself writing own convenience like `toggle` which is basically
```
if self.is_low() {
self.set_high()
} else {
self.set_low()
}
```
…
-
hello iwanders,
thank you for your great work on this library.
i am using it with MC33660 and communications seems to work fine when the init is not done. however although i'm trying for days now, i…
-
I tested a blink.spin which blinks LED and uploaded it to the Propeller 40 pin DIP chip using the Prop USB plug and it blinks the LED just fine. But running the .binary file does not seem to work afte…