-
## Current Behavior
100Hz does not work, tx and rx can't bind at 100hz.
## Steps to Reproduce
1. set MY_BINDING_PHRASE like "hello"
2. set Packet Rate to 100Hz
3.
4.
## Poss…
-
在bugly后台发现了崩溃信息: 但是不知道怎么重现啊:
1 #00 pc 0003c048 /system/lib/libc.so (tgkill+12) [armeabi-v7a]
--
2 #01 pc 00017a01 /system/lib/libc.so (pthread_kill+52) [armeabi-v7a]
3 #02 pc 00018667 /syste…
-
## Current Behavior
![image](https://user-images.githubusercontent.com/25802530/148010440-3395602b-5891-43da-861c-e18cddf3a9ce.png)
## Steps to Reproduce
1.
2.
3.
4.
## …
-
Hello is there any plan about supporting r9m 2010 qx7 access version with fport. Because ym receiver obly can accept fport and only access firmware is available. And i found some frx ftx vtd and gnd p…
-
Update 2021-05-22 :
This is a known behavior.
I believe this issue should remain as low priority bug/enhancement.
I did notice a reference that ExpressLRS is averaging 5 RSSI samples.
Does t…
-
Hi, its me... again :D
I finally had some time and hardware comes... but I am not able to run it on my board...
![2021-07-27 08_41_06-FrSkyToWiFi - config h _ Arduino 1 8 15_2](https://user-images…
-
any idea why my roll/pitch is not moving all the time?
I am using taranis, R9m modul + inverted s.port + HC-05, F.PORT firmware! and betaflight latest fw version
![Screenshot_20201013-101257_Te…
-
After using Companion to install version of 2.3.14 (from 2.3.10) causes every model that used internal XJT module for RF setting to lose the setting, and sets radio Internal RF Mode to OFF. I do not …
-
Many of the current FrSky radios have a builtin bluetooth (LE) module, that can be used for wireless trainer or telemetry transmission (see for example the "FrSky Dashboard" app in the Play Store).
…
-
is it possible to have power settings for the fullsize r9m module for the x-lite controller. I'd rather run the full module on an x-lite. I don't have one yet, but it's a feature i'm looking for.