-
So I eventually got around to updating from 1.3.10 and a couple of things stopped working.
1. the standard I2C bus scan finds a device at every address, not just the one device that is actually pre…
-
I set up an ethernet GW with following sketch
```
/*
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller…
-
Hello, i have a problem with ESP8266 and i need some help.
I'm trying to control the esp8266 with a wall switch to active a relay.
This is the connection of the esp8266:
GPIO 00: connected to a 10K…
-
This is more of a support request than a bug, let me know if there's a more appropriate place to ask.
I'm trying to get this working with an [Adafruit RFM69 bonnet](https://learn.adafruit.com/adafr…
-
Hi
I have a RFM69 attached to a 1284p.
fuses; lfuse:0xc2 hfuse:0xd1 efuse:0xff:
Attached the pins (using the bobuino pinout)
` MOSI: PB5 `
` MISO: PB6`
` SCK : PB7`
` SS : PD7`
` INTR PIN:…
-
Hi there!
I tried to compile the rxtxblinky for the esp32 and got stuck with several errors.
Digging deeper i found some lines in the source, which seem to me, there is some kind of support for th…
stm01 updated
3 years ago
-
### Hardware:
Board: ESP32-WROOM-32U
Core Installation version: 1.0.4
IDE name: VSCode + Platform.io
Flash Frequency: 80Mhz
PSRAM enabled: No…
-
Hi,
Just seen a post on Arduino Forum about this project !
Really nice work !
I'm planning to use this for Somfy RTS blinds, so I need a special frequency...
Instead of finding a weird freque…
-
Can't get ESP8266 gateway to work anymore
Hello,
I have been using MySensors for a long time. First with serial gateway now with ESP8266 gateway. For months everything worked fine except for sm…
-
First, there's a typo in the method name `setFreqeuncy`, it should be named `setFrequency`.
Then, I have no idea how to use that. What's the `FRF` parameter? Is it the actual tx/rx frequency in MHz…