-
I try to enable the low power states on the Pico 2 but without any success. If I read the documentation correctly, power state P1.7 equals 1111 in binary or 15 decimal. Using
```
uint32_t ps = 15…
-
Hi,
There is a new version for the Pico SDK available: 2.0.0. I want to switch to this version because i want to develop also for the RP2350. (Still waiting for my Pico 2 to be delivered)
Howev…
-
To load a pico2, picotool needs sudo - yes, I copied 99-picotool.rules
> ls /etc/udev/rules.d/
99-SaleaeLogic.rules 99-picotool.rules
====== with pico2 ===================
## built with set(PICO_…
-
Hello,
I came across your project on a YouTube channel. But I saw you were porting to pico2 and stopped due to the latch-up issue
Re-read the errata. The issue doesn’t affect your 24 input c…
-
Hi
I use a A2DP sink device programmed with an earlier version of the Pico SDK and an earlier version of the board implementation.
Now, I had to change some things in the program. I am using ardu…
-
Having empty flash or picotool incompatible binary or picotool compatible binary and trying to:
```
picotool load -x "firmware.uf2" -f
```
results with success rate of 50%. For incompatible binary…
-
In "old" sdk the svd file was named rp2040, in latest sdk it's named RP2040.svd.
Is that an omission or change in naming convention?
-
This is so weird that it must be a problem in my setup... but it is happening in my desktop and my notebook. The following sketch should turn on the Pico LED after a single floating point multiplicati…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.4 on 2024-09-17; Adafruit Metro RP2040 with rp2040
Board ID:adafruit_metro_rp2040
UID:DF6260785F3B3E2B
```
### Code/REPL
```python
…
-
Hi there! I'm trying to upload to rpi pico with a raspberry debugprobe (this thing https://www.raspberrypi.com/documentation/microcontrollers/debug-probe.html, firmware 2.0.1).
Everything is connecte…