-
When I run my SDR on the latest version of Raspbian, I get a garbled auto output from OpenAL that is just barely understandable. When I run a simple example, that should give a simple sine wave - I ge…
-
Hi there,
I implemented the Mioty network using the Raspberry PIs.
For the sensor endpoint side I am using a Pico Pi with RFM69HCW which works well, as I tested using a spectrum analyzer; it trans…
-
I tried to receive GPS L1 C/A signal in real time using RTL-SDR and GNSS-SDR software. My first position fix ( https://gnss-sdr.org/my-first-fix/ ) using the downloaded file from the GNSS-SDR site wor…
-
I've watched David Michaelis youtube on using cariboulite with DragonOS but I've not gotten very far with it. I am trying to get this working on a Raspberry Pi 3B while I wait for a Raspberry Pi 5. Dr…
-
I am trying to get SoapySDRserver working with GQRX but all I ever got was a constant waterfall. Frequency changing did not change anything. After that I ran cariboulite_test_app and got:
`09-04 22…
-
Tried running fax dll on two different win10 64 bit pc, both failed saying dll was incorrect.
-
I'm cant change the center frequency on the web page, if i want to, i need to change the config file in the console, and then restart the process.
Thanks!
-
RPi4b8gb - Installed librpix and SoapySDR_rpitx, rebooted per the instructions. Module is in correct directory.
Fired up GNU Radio Companion and cannot find any modules for rpitx.
At a command …
-
Update sdrtrunk for compatibility with sdrplay API version 3.16
-
Please advise?
SoapySDRUtil reporting all god but not able to
reach unit from Win10/SDRAngel or Ubuntu 16.04/CubicSDR
Regards
Djani
// Terminal copy from RPI side
pi@raspberrypi:~ $ SoapySDRSe…
9a4db updated
4 years ago