-
I got a [SIM7000G](https://www.amazon.com/gp/product/B07H3YNCQS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) from amazon. The reason I purchase SIM7000G instead of SIM7000A is that it can work fo…
cszuo updated
5 years ago
-
Hi,
I have some issues connecting to Rogers in Canada with Hologram SIM. I was able once... I am wondering if you can grab the latest firmware B02 for the SIM7000G. Perhaps there is something resol…
-
My previous issue was resolved. I was missing a library.
After uploading the IoT_example code, and changing the APN to match our providers APN, the system is trying to enable GPRS but fails. Keep so …
-
![IMEI ERROR](https://user-images.githubusercontent.com/50469556/57495606-f9a02f00-729c-11e9-8aab-51522a1eaf25.PNG)
Im using a Sim7000G, the LTE_DEMO worked but the IoT-Example just gets stuck here…
-
Included the serial output. I am using CloudMQTT. I have the 7000G version. I was able to successfully work through the LTE Demo sketch. I did have to add these two lines.
fona.setPreferredMode(38)…
-
I am working with the sim7000G and would like to install the project in a metal enclosure, along with the electrical components it's tied in with.
This will likely require me to move to a differe…
-
Hey,
So I tried running the LTE Demo Sketch, it compiles properly but when i run the serial monitor, its just outputting random characters and at the end it say 'Couldn't find FONA' as shown in the…
-
I am currently using this board with an Arduino Uno and I cannot get it to work with a generic SSD1306 display.
Everytime I try to use the libraries together like in the code below, i get stuck in…
-
Hi,
Just tried the B05 firmware but couldn't setup PPP over UART anymore:
```
-> AT+CGREG?
AT+CGATT?
AT+CPSI?.
AT+CGPADDR.
AT+CGNAPN.
ATD*99***1#.
ATD*99***1#.
-
Hi,
SIM7000 units use GNS AT commands as per the manual. I know AT+CGPSPWR? mysteriously works on the 7000 at the moment but it might be worth changing enableGPS to this:
`boolean Adafruit_FONA:…