-
DoD is complete. As mentioned below, running "while true; do dd if=/dev/i2c-soil-drv count=1 bs=1 | od -x ; dmesg | grep "Raw sensor data" | tail -1 ; sleep 1; done" from the shell will show 0 in dry …
-
### Analysis
I am running a vanilla OpenMQTTGateway on a LilyGo RTL 433 Module. Sometime the firmware crashes with the information shown below. I can reproduce the exception when I power on an Orego…
-
I have been working on adding measured soil water content data that doesn't reach a depth that meets the _rzmax_. This leads to an IndexError when trying to use the _computeDr()_ function.
Lines i…
-
-
Today @jdemieville-ua and I ran multiple VNIR test scans across the short axis of the field with targets deployed at a range of exposure settings, all at 0.04 m/sec velocity (y axis speed). The major…
-
Set up and test the LoRa communication between the Soil Moisture Monitoring System and the LoRa Gateway.
-
I have a problem with the deep sleep watch dog of the v2.1. SLEEP_CYCLE is set to 105 (~15 Minutes). For some days it works perfect. But since last night it doesnt sleep anymore and send every 5-7 sec…
-
Hi all,
i do have an Ecowitt HP2551 and pulling the data via WeeWX Interceptor running as ecowitt-client.
Since this morning Weewx Interceptor shows only "empty queue" with debugging enabled.
l…
-
Running on Raspberry Pi 4B, Pi OS, brand new build
rtl_433 version 23.11-160-gf0ba1538 branch master at 202408270014 inputs file rtl_tcp RTL-SDR
Also enabled:
protocol 78 # Fine Offset Electroni…
-
# Challenge 34 - Regional to Urban Air Quality Mapper
> **Stream 3 - Software Development for Earth Sciences applications**
### Goal
Develop an application capable of improving (downscaling) th…