-
**Your Sungrow inverter:**
- Model: SH-10.RT v112
- The inverter is connected via (mark one)
- [x] LAN (internal port)
- [] WiNet-S (LAN)
- [] WiNet-S (WLAN)
- Are you using …
-
Hi guys. found this project after many failed attempts with other stuff out there. although did have some success with solariot.
my problem is I have the older v25 wifi adapter here in Australia. p…
-
### Describe the bug
I reference to https://github.com/evcc-io/evcc/issues/14387#issuecomment-2243500663
Unlike the described case within the referenced issue in this case it started charging with…
-
### Describe the bug
If selecting less than 6Amps as min.current, the following error message appears in the logs and the charger stops charging
[lp-1 ] ERROR 2024/05/30 18:59:15 max charge cur…
-
I just upgraded HA supervisor and after that upgrade i get invalid configuration.
Home Assistant 2023.8.3
Supervisor 2023.08.1
Frontend 20230802.1 - latest
Check and Restart
A basic validatio…
NBD99 updated
11 months ago
-
As it seems it was more complicated to interpret the modbus data and there seems to be custom endianness and sizes of even the raw data.
One suggestion would be to interpret everything read from mo…
h0bb3 updated
11 months ago
-
I'm trying to configure emhass on my home assistant installation running on a Raspberry Pi 4 rpi4-64.
I'll get errors when using my selected pv_module and pv_inverter. Maybe I don't apply the right n…
-
**Describe the bug**
After upgrade to OS 11 and HA 2023.10.3 no data
**Your Sungrow inverter:**
- Model: [SH-8.0RT v112]
- The inverter is connected via (mark one)
- [X] LAN (internal po…
-
I managed to setup prices from nordpool (hourly dynamic) and pv forecast from solcast. My only workload should be currently charging the battery when its cheap and not much PV is in forecast (10 kwh b…
-
When upgrading to Home Assistant to 2023.10.1 the configuration breaks with hundreds of errors, but works fine on 2023.8.4
**Your Sungrow inverter:**
- Model: [e.g. SH-10.RT v112]
- The inver…