-
Hello guys,
Has any of you managed to get this firmware working properly on T-Watch 2019?
I tried to `#define LILYGO_WATCH_2019_WITH_TOUCH` on config.h but yet the touchscreen doesnt seems to …
-
I note you have 2 firmware repos for the same TTgo 2020 watch. Can you help me understand what's the difference in the use case between them?
Ref: https://github.com/OPHoperHPO/lilygo-ttgo-twatch-2…
jhfoo updated
4 years ago
-
Can the author update data for their latest watch model?
If the hardware, pin map for 2020 is exactly the same as previous models, please confirm in your README.MD. I don't think it's exactly the s…
jhfoo updated
4 years ago
-
我试过tft->drawString("你好", 0, 0);但是屏幕无输出
-
Hi, maybe I've gotten something very wrong here, but this project doesn't seem to work to me. I was able to build and flash using the Arduino IDE after changing the name of the folder to "DudleyWatch"…
-
What kind of issue is this? Bug in PlatformIO Core
### Configuration
**Operating system**: Windows 10 Home
**PlatformIO Version** (`platformio --version`): 5.0.1
### Description of problem…
-
Creating a new issue to avoid contaminating the last one: will you know how to get BMA423 supported on micropython? LoBo included in his firmware built, but that's outdated already.
If there is a …
jhfoo updated
4 years ago
-
I think that the documented calculation to use with the coulomb counters, wrongly assumes 100% efficiency in the battery. If you measure all the energy going into the battery during charging, and all …
-
If you do go into this menu screen you will have to reset the TWatch by holding the bezel button down for > 5 seconds. The press the button again for > 2 seconds to turn the TWatch back on.
-
Would like to be able to set an alarm or a timer on the watch. Ideally would like option for motor vibration as alert or audible.