-
Hi Martin,
yesterday I tried something new, this time on my CNC router (not at the office PC).
I make the front of another WordClock. The characters are milled from the front side, then filled w…
-
Hi,
hope it is allowed to ask for features here.
It would be nice if the wordclock can be switched ob by night
e.G from 00:00 to 06:00 in my case
-
I have change from Christians Bastel-Laden to this Raspberry Pi Wordclock.
But by me is the left top LED not LED one its LED four.
How can I change the sequence of the minutes LEDs?
-
Hi all, this is a question rather than a question.
Does anyone have a cnc ready vector file for the frame/base of the word clock ?
Thanks in advance.
/Kim
-
Hello, i wired my leds the False way, and now the " IT IS" is not in the upper left corner it is in the upper right corner. Can i change the code so that it fits my wiring or do i need to change every…
-
Using the library for over three years now and wanted to upgrade my code to the latest version. Using NeoEsp8266BitBang800KbpsMethod with 228 WS2812b LEDs, with a custom made board and a stock ESP8266…
siedi updated
4 years ago
-
Hi WordClock makers!,
I am trying to build my own Word Clock and am in the final stage of testing the LED strips. Unfortunately, I ran into problems here.
I'm using a Raspberry Pi Zero W, combin…
-
I didn't pay attention and wired my clock in a different direction. As you can see in the attached image i started with the minute leds in the top left corner, followed by bottom left corner and then …
-
Hi,
I'm new to laser cutting, trying to use the files you provided.
When I upload them to Ponoko, only the dimensions on the clear part of the enclosure passes the laugh test. The files for the lett…
-
Can anyone point me in the right direction, the strandtest.py is running fine al leds work.
But when I try to run wordclock.py i'm getting the following messages.
![Untitled](https://user-images.git…