-
I installed Raspbian-OpenFlexure system on my RPi 3, I installed required repo for ADC with pip.
Then I've downloaded [example extension folder](https://gitlab.com/openflexure/microscope-extensions/e…
-
As Philip has correctly pointed out, we have a soft break introduced in Lua 5.3 in the we've moved our default build to `sint32` / `float32` sub types so that a `TValue` can fit into 8 rather than 12 …
-
Does Adafruit-Blinka support Orange Pi 5 Plus?
(http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-plus.html)
if I query
orangepi@orangepi5plus:/usr/local/li…
-
In file included from c:\Users\Minoas\Documents\Arduino\libraries\M5GFX\src/M5GFX.h:19:0,
from c:\Users\Minoas\Documents\Arduino\libraries\M5Unified\src/M5Unified.hpp:19,
…
-
Hello, I am trying this code for the MPU9250 and I am able to obtain the pitch and roll orientations, but I am not able to read the magnetometer for the yaw estimation. This is what I get when runnin…
-
I could be wrong, but I don't think these are correct?
```
void ADS1X15::setComparatorPolarity(uint8_t pol)
{
_compPol = pol ? 0 : 1;
}
void ADS1X15::setComparatorLatch(uint8_t latch)
{
…
-
Hi Robert,
If you follow the datasheet of the ads1115 your "raw_to_v(self, raw)" should divide by 32768 and not 32767 (line 146).
See chapter 9.5.4 of the TI. datasheet. (notice that the left arro…
-
Filesystem labels are allowed spaces. The script is passing the new label unquoted/unescaped, so it ends up being `mkfs -t ext4 -L NEW NAME /dev/nvme0n1p2` and failing.
-
### Board
ESP32S3
### Device Description
ESP32S3 connected with 2-ADS1115 @ 39 and 40th pins for I2C
one with (0x48) another with (0x49)
### Hardware Configuration
for I2C,
#define SDA0_Pin 39
…
-
Hi,
I have a X20s on FW1.4.9 with Archer R4 and openXsensor.
With my fisrt model it works perfectly fine, and same configuration on another model and I have plenty sensor lost alarms on diverse se…