-
*petersv:*
Summary: After a while clients become isolated, even though "isolate clients" is not enabled. The DFS radar deteion somehow leads to hairpin_mode being set to 0.
Devices:
Tested on sev…
-
*huaracheguarache:*
I have a TP-Link RE450 v1 wireless repeater running OpenWrt SNAPSHOT r6257-94a3af88f3 that I want to set up to extend a network running on a DFS-channel. I am able to connect to t…
-
*huaracheguarache:*
I have a TP-Link RE450 v1 wireless repeater running OpenWrt SNAPSHOT r6257-94a3af88f3 that I want to set up to extend a network running on a DFS-channel. I am able to connect to t…
-
*enryIT:*
Device: Netgear R7800
This issue is not present with original Netgear firmware and is not present with LEDE 17 (older kernel).
Preface:
I have very strange issue with interfaces MTU a…
-
### Describe the bug
Since my Linksys WHW03 V2 APs use the SNAPSHOT release, they can only boot successfully if a cable is connected to one of the 2 ethernet ports. This is not very convenient becaus…
-
### Describe the bug
I have several OpenWRT routers. One is configured as router, the other as dump AP. I use VLANs for multiple Wifi SSIDs. I have a bunch of clients which are always connected. Mo…
micw updated
4 months ago
-
### Describe the bug
Build v23.05.2 using standard procedure - clone, checkout.
Set i2c-gpio bus in config. Set other options needed for the intended application.
Build.
The bus driver (i2c-gpio.…
-
Maintainer: @aparcar
Environment:
- arch: ARMv7 Processor rev 0 (v7l)
- model: ASRock G10
- version: OpenWrt 23.05.2 r23630-842932a63d
- target platform: ipq806x/generic
Description:
Whe…
-
Dear lwfinger:
I using this driver for an openwrt system on an arm64 architecture. I want to connect to the network using wireless in STA mode. When I click on the scan button under radio0 in openwrt…
-
### Describe the bug
When the Samsung A54 connects to the 5G wifi DFS channel there is no connection established and the 5G channel completely blocks. In the log you see:
kern.warn kernel: [ 2209.…