-
According to [this Avrfreaks forum thread](https://www.avrfreaks.net/forum/hv-updi-programmer), the Pickit4, Powerdebugger and the MPLAB ICE4 are the only official UPDI compatible programmers that sup…
-
The Raspberry PI communicates with ATMega4809 inside the OrangeHat using a bidirectional UART channel and a RPI controlled Reset.
Implement the communication and parser driver so that the OrangeHat…
-
Hi, I need some help. My question is simply how to display data from atmega 4809. Can we use Arduino Uno or nano for this purpose by using their Rx and Tx pins? Do you recommend any other module for t…
-
**Describe the bug**
Hi, I noticed when drawing lines with the display.drawLine() function that it seems to draw broken lines. Most of the time it's missing every second pixel.
**To Reproduce**
S…
-
Arduino Nano Every has 16 Bit Timers (5 actually) and its more "powerful" than ATmega328P (16mhz vs 20mhz). And works on 328P...
is there any way to make it work on the 4809?
-
Hi!
Super excited about the possibility of Bloom - support for '4809 is universally terrible, so anything that improves that will be awesome - but running into some initial problems, maybe you can …
-
Compiled from latest source,on Linux.
Have a small test program for a ATmega4809 that I've exported the hex file from Arduino IDE.
Writing it using avrdude and a pickit4 in UPDI mode does not work a…
-
While trying to connect to an `ATXMEGA128A1U` target, I am getting the following error:
> Flash page size for target (512 bytes) exceeds maximum memory access size for EdbgAvr8Interface (256 bytes)…
-
From what I'm able to find via google: "You're trying to declare a variable with the same name as a macro,"
Board is a ATMega4809 (Nano Every)
```
C:\Users\Echo\Documents\Arduino\libraries\Fast…
-
My tests (and example tests) compile correct for Arduino UNO (ATmega328P) but NOT for Arduio Nano Every.