-
### Bug Report
**- Description:**
After issuing the `G29` command to use the Bilinear Leveling feature, the printer does not react to either the `M851` command nor to a change in the `Z_PROBE_OFFSET…
-
This test card is used to validate ideas and working hypotheses consistently in 4 steps: 1) Hypothesis 2) Experiment 3) Metric 4) Criterion
## 1. Hypothesis: We believe that
A modular robot can ma…
-
_From [bluearc....@gmail.com](https://code.google.com/u/112158384960039030429/) on September 17, 2013 04:16:29_
This is a space for Fritzing users to upload and share their self-created
parts with o…
-
Is there a requirement for object moving speed? I have a robot moving around 10-15 mph, can I use T265 to track the robot position?
-
There is a board on ESP32. Compiled the firmware based on Marlin 2.0.9 and Esp3dlib. But there is no connection between the WEB interface and the firmware. A similar GR BL firmware works on this boar…
-
### `brew config` output
```shell
HOMEBREW_VERSION: 3.1.3-124-g94ce323
ORIGIN: https://github.com/Homebrew/brew.git
HEAD: 94ce3236a517dfae6b492dcb4fd6b726a6175e8f
Last commit: 9 hours ago
Core ta…
-
I am not a specialist, but I use several printers at one time and I wanted to prepare them for printing on layers as low as 0.2mm.
The prints came out satisfactorily on the center of the printer ta…
-
I am not sure the best way to do this. If this is wrong, please point me in the right direction. I know it isn't a traditional github "issue".
I feel that having lots of good quality BreakOut Board…
-
A [new OpenOnload driver - v7.0.0.176](https://support.solarflare.com/index.php/component/cognidox/?view=categories&id=361) was released in September.
The latest version in this repo is the prior …
-
Controls from Signal K has been discussed before, and post V1, we could start populating this group.
I'm picturing a `controls` group or something along those lines. At this stage we should be able…