-
Hello all,
I have a problem setting different baudrate than 115200.
I tried to change the factory_param_data.csv.
```
platform,module_name,description,version,max_tx_power,uart_port,start_ch…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Anybody got any ideas about this?
I was successfully using an OpenOCD build a while ago to run the tests against the SiFive HiFive1 Rev A01:
* https://github.com/riscv/riscv-openocd/issues/869#i…
-
你好，我再执行./build.py build时报错如下，请问是咋回事
yyy@DESKTOP-6TBOMGV:~/esp-at$ ./build.py build
Platform name:ESP32C3 Module name:MINI-1 Silence:0
submodules check completed for updates.
softap_pmk.pa…
-
Hi,
ESP32C2 SVD file is missing ECC_Mem_k, ECC_Mem_Px and ECC_Mem_Py interface in the SVD file such that the registers are not generated.
-
### The issue
Hi,
I tried both the multi and single example code in PlatformIO with a single DS18B20 sensor. The multi example worked fine, but the single example reported a temperature of 204 de…
-
Hello.
Because NG support for ESP32-C2 not ready while, i trying now to use FG for my linux system.
ESP IDF 5.1 , esp-hosted-release-ng-v1.0.2 , only changed Data Ready and Handshake gpios accord…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Is your feature request related to a problem?
When using esp_pm_get_configuration(), it is necessary to define as follows.
```
#if CONFIG_IDF_TARGET_ESP32
esp_pm_config_esp32_t pm_conf…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…