-
## Current Behavior
When using **Generic ESP8285 Full-duplex 2.4GHz RX as TX** as the transmitter module, It takes about 1 minute to connect to the receiver for the first time after turning on the …
-
## Current Behavior
My ExpressLRS radio can not drive my servos to the full range of travel that my Sanwa or Flysky radios can achieve.
## Steps to Reproduce
1. Hook a servo up to a Flysky ra…
-
## Current Behavior
Using the LUA script changing from CRSF to SBUS will output SBUS protocol on the receiver's TX pin instantaneously. However changing back to any non inverted protocol (e.g. CRSF…
mha1 updated
4 months ago
-
## Current Behavior
At startup after power-on with radio powered an waiting for connection the receiver triggers f/s while the RGB does its light show, connects briefly, looses connect and reconnec…
mha1 updated
6 months ago
-
According to
https://github.com/ExpressLRS/ExpressLRS/tree/master/src/lib/CrsfProtocol
I assumed, I should see barometer 'Alt' on the radio telemetry screen.
- TX hardware: FrSky X10 S Express …
ghost updated
7 months ago
-
### Describe the bug
No dynamic power reading on the OSD (analog). Using latest ELRS and Dyn power. I selected Vx uplink power to show on the OSD, but it always shows 0mW. The correct power shows on …
-
Seeing errors near baud rate after updating elrs to 3.4.0 on my x20 radio. Not sure what has changed but can we get the support for latest elrs update?
-
### Describe the bug
The baudrate for CRSF is defined as 420,000baud. This is incorrect. Trappy from TBS confirmed to me today that CRSF uses 416,666 and always has. I've not verified this state…
hydra updated
6 months ago
-
## Current Behavior
I recently tested 50Hz for the first time between two 150Hz flights in a rural location. Before testing 50Hz mode I flew a short flight in 150Hz with normal performance. After r…
bede updated
5 months ago
-
Is there a plan to add support for the long range systems (TBS CrossFire/FrSky R9)?
By taking apart the R9M and the R9 I own, I found they are based on the SX1276 LoRa chip from Semtech (https://www.…