-
Hey,
I try to compile espurna with Arduino IDE for my **H801**. I'm using the **MASTER**-Branch and it compile file and also the flashing works fine but suddenly it just die (and sometimes reboot).…
-
Hi all,
I just connected a WS2812 led strip to a Wemos D1 mini like device (see below). It receives 5V from an external power source and is only connected to D8 (GPIO15).
led | other device(s)
…
-
Hi,
Is it possible to connect 5 pin led strip lights set to ARILUX® AL-LC11
an how ?
The cable I see has 5 male pins and the ARILUX® AL-LC11 has 6 pins.
Please help, do I need an adaptor to buy al…
-
Hi,
I have some trouble getting my H801 LED Controller getting to work. I flashed it with the newest Tasmota Software. That was no problem. I can set the RGBs over the console. It works with SetOptio…
-
Originally reported by: **Erwin (Bitbucket: [elonden](https://bitbucket.org/elonden), GitHub: [elonden](https://github.com/elonden))**
----------------------------------------
Hello Xose,
I flashed…
-
Make sure these boxes are checked before submitting your issue - Thank you!
- [ ] What hardware you are using
- [ ] Provide the output of command ``status 0``
- [ ] If you have a stack dump decod…
-
There are so many other colorful led lights other than philips (yeelight, ailight, itead led light, h801 with sonoff-tasmota firmware and so on) with open http apis
It would be really great if ther…
-
It is possible to set a colour by using the `root/channel/[0-4]/set` topic, but the `root/rgb/set` does not work (I have tried both numeric `255,0,0` and RGB `#FF0000`).
-
Make sure these boxes are checked [x] before submitting your issue - Thank you!
- [x ] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [ x] Searched the problem…
-
I am building the firmware with the "custom.h" and "core_version.h" files where the devices have a prepared configuration by preprocessor instructions. Next i am uploading via ota and doing a factory …