-
I have connected my esp07-module as shown here: http://reflowster.com/resources/images/blog/esp8266/usbprogram.png and the ck bootloader reset method isn't working.
Altough with esptool.py it works f…
luggi updated
8 years ago
-
Hello all together,
Quite new in learning how to flash an ESP32 I am trying to use VSCode and platformIO extension to flkash the ESP32.
Right now I made following steps:
- Copied everything f…
-
### Board
esp32-c3-devkitm-1
### Device Description
esp32-c3-devkitm-1
MAX98357AETE+T
### Hardware Configuration
I2S.setSckPin(6);
I2S.setFsPin(7);
I2S.setDataPin(10);
### Version…
-
My name is Mark, and I've been working in the Samsung IoT group with your PubSubClient for many months. Over the last month, it was functioning extremely well with two simutaneous instances, one to a …
-
I just installed the stack trace tool, and I am getting this error message. I have also searched for the tool chain...and found it can be installed from here:
gnutoolchains.com/esp8266/
but after t…
-
Write here if you want to have another platform supported by MicroFlo, or if you are working on adding support.
The targets that are already working: Arduino
AVR8 support is in progress (see issue #5…
-
#### Description
The virtual COM port provided by the EDBG debuggers doesn't correctly handled rapid bulk transfers from the host computer. This becomes apparent when using a local setup. A remote …
-
Could an option be added to `pio run` to turn off LDF for a build?
If I know that dependencies haven’t changed, I’d like not to take the time to run LDF by default, and so get a **faster edit/comp…
-
# :wave: Welcome to GitHub Learning Lab's "Introduction to GitHub"
To get started, I’ll guide you through some important first steps in coding and collaborating on GitHub.
:point_down: _This arrow m…
-
### The problem
so I am happy user of ESPHome with some ESP32S boards. Recently I bought ESP32-S2-WROOM and I am completely not able to integrate this board with ESPHome. Is it because S2 is not supp…