-
Please add hwModel to meshtastic CLI output In the "My info" section.
It's needed for automatic device type detection for choose with firmware must be flashed via ansible playbook.
D4rk4 updated
2 years ago
-
The --info query has returned this strange output
![meshtastic info](https://user-images.githubusercontent.com/94171199/147764127-0a5e229c-6b00-454b-bd39-bd58ae31302d.jpg)
Meshtastic-python .48
D…
-
In EU it is possible to use 433 MHz and 868 MHz frequencies. It would be great if it will be possible to form mesh with mixed frequency into B.A.T.M.A.N routing (need special gateways with both bands)…
-
**Describe the bug**
I was beginning testing of 1.2.46.dce2fe4 alpha and I usually do initial testing via the meshtastic python app. (`pip3 install meshtastic`)
However, exactly every other command …
-
Need to figure out why these pytest smoke1 tests are not working thru pytest... they are working when ran manually.
See ~~https://github.com/meshtastic/Meshtastic-python/blob/master/meshtastic/te…
-
Equipment e480 is controlled by c500:
c480:
```
$ meshtastic --port /dev/ttyUSB0 --gpio-rd 0x10 --dest \!f244c480
Connected to radio
Reading GPIO mask 0x10 from !f244c480
GPIO read response g…
-
(make sure the menu bar does not say "Python")
-
If I'm trying connect to radio via WiFi from python, I'm getting error:
```
interface = meshtastic.TCPInterface(hostname='192.168.1.28')
AttributeError: module 'meshtastic' has no attribute '…
-
**Describe the bug**
ExternalNotificationPlugin was set up correctly but tone was not played at message receive.
**To Reproduce**
Steps to reproduce the behavior:
1. Connected active piezo buz…
-
Ideal to make builds of Meshtastic-python as a GitHub action