-
Hello! Thank you for your work on the library!
I was trying to use the library with my ESP8266, I tried compiling it, but after flashing it did not show up in the modules in micropython. I used th…
-
The FTDI connection works with miniterm.py. Test conditions:
```
[adminpete@capybara]: /usr/local/bin
$ ./rshell --version
0.0.26
```
When invoked it hangs at this point:
```
[adminpete@capyba…
-
I ran into an issue trying to use Blinka under Micropython on a Raspberry Pi Pico.
I was trying to see if I could use an "airlift" with the esp32spi library.
The first problem had simple "workarou…
-
**Version:** ESPlorer v.0.2.0-rc5
**OS:** Mac OS 10.13.6
**Board:** ESP8266 (NodeMCU-devkit with USB)
I've flashed with default firmware via nodemcu-build.com. I'm able to Connect to board throug…
-
Thanks for this great tool! When trying to burn the firmware to an Adafruit Feather board, I was running into continuous problems. It turned out that some USB chips require a slower baud rate, like 11…
-
Hey guys!
This awesome library can be made to work with micropython easily by using the [micropython port of datetime](https://github.com/micropython/micropython-lib/blob/master/datetime/datetime.…
-
The code example in [the docs](http://docs.micropython.org/en/latest/library/machine.RTC.html) fails with a surprising traceback.
```python
rtc = machine.RTC()
rtc.init((2014, 5, 1, 4, 13, 0, 0, 0)…
-
perhaps https://github.com/salimfadhley/pybkick
-
>>> import network
>>> import machine
>>> eth_if = network.LAN(mdc = machine.Pin(23), mdio = machine.Pin(18), power = machine.Pin(17), phy_type = network.PHY_LAN8720, phy_addr=0)
>>> eth_if.active(…
-
I can't get behind the following issue:
I run this script:
```import machine
import network
from time import sleep
from urllib.urequest import urlopen
import json
wifiap = network.WLAN(ne…