-
Hello there!
I installed GNU Radio and bladeRF via PyBOMBS as described here:
https://github.com/Nuand/bladeRF/wiki/Getting-Started%3A-Linux#Building_bladeRF_libraries_and_tools_from_source
W…
-
Hey folks,
I noticed when I went to download the firmware for the A4 that the checksum files for revision v0.7.3 and v0.7.1 throw a 404 when I try to visit them. It looks like the links in the v0.7…
-
As documented in issue #351, we've found that we're receiving libusb transfer completion callbacks out-of-order under certain conditions. This seems to occur for higher samplerates when inducing mom…
jynik updated
6 years ago
-
Need to finish tagging 2018.08 and build a Windows installer.
I'll post here once it's done.
-
in kali linux#dmesg:
[ 766.216117] usb 1-1: USB disconnect, device number 4
[ 2481.315248] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 2481.673171] usb 1-1: New USB device found, …
-
it's possible to flash a bladeRF micro to an incompatible firmware version, which requires a bootloader recovery to fix
this should be avoided if possible
-
If [editline] or [readline] are available, one of them could be used to add more features to interactive mode (e.g. history).
[editline]: https://linux.die.net/man/3/editline
[readline]: https://l…
-
Ubuntu 16.04.3, kernel 4.13.0-32-generic
Pothos and all Soapy modules installed from git.
Running a simple SoapySDR source and a histogram gives the following error. It continues cycling through t…
-
Doing `bladeRF-cli -l ~/Downloads/hostedxA4-latest.rbf -v verbose -e version` on an xA4 without an FPGA image loaded results in some sort of situation where the FPGA version reply is corrupted.
Ori…
-
Hello folks,
I have an interest in using the Soapy python bindings with one of the new BladeRF Micro A4 boards. Unfortunately, I have run into problems trying to build SoapyBladeRF against versions…