-
Bonjour,
Je viens de recevoir le LIXEE en v2. Installé avec Z2M, màj OTA en V14 (très long mais semble ok) .
►Compteur Linky en mode historique mono phasé, pas de production.
Qualité de la liais…
-
How do I use these files？How can I use this firmware to upgrade my device?
-
tried UART flashed W800 to 1.16.7, 1.17.358 and 1.17.571 to see if OTA has ever been implemented.
log out just says this. web app and gui menu OTA option tried.
```
Debug:API:POST to api/ota
…
-
我通过mesh-lite将设备进行组网，并通过mesh-lite-lan-ota进行升级，通过改变APP version控制版本，发现根节点和http服务器的APP version是10，然后mesh第二层app version是9，第三层设备升级后版本依然为9.
int now_version = get_current_version();
esp_err_t ota_finish…
LYL14 updated
5 months ago
-
When I turn on the wifi station and wifi AP at the same time in esp32, the newly created thread cannot run. It is tested in multiple versions of firmware. What is the reason?
boot.py:
```pytho…
-
hi guys I'm back this is my function for the OTA but i don't think its working it is downloading and deploying on the root but i think im missing something for the non root nodes ?
```void advanced_o…
-
# Overview
As discussed in #620, there is a possibility that the wrong firmware will be accidentally flash to the wrong device.
0. **Humans must make mistakes because they are incomplete.**
1. …
jehos updated
20 hours ago
-
Hi, I created the bin with the esphome addon for home assistant and I flashed it on my JC3248W535EN screen through ESPHOME WEB, but I can't get it to turn on, it keeps rebooting constantly.
If I re…
-
amsm
-
I was able to download and install this into my NodeMCU module, and sample code ran as designed and connected to my home network. It also showed up as an IP connection in my Arduino IDE. However, wh…