-
Hi all,
I did succeed in flashing a device with the new tuya sdk with tuya-convert.
Changes needed are in my own fork, for reference
https://github.com/M4dmartig4n/tuya-convert
It is not rea…
-
First: Thank you very much for providing this library!!!
I have a couple of modules with the nRF24L01+ chip, bought them in bulk at AliExpress and am planning to use them to send sensor data from Fiel…
-
BerryBoot will not boot on Raspberry Pi 3 B+. The power LED (red) is lit, but the ACT LED is not. Typically this would indicate a bad microSD card or boot image. The Pi never loads the GPU screen test…
Nilpo updated
6 years ago
-
Hi, there!
First of all, let me apologize if I've done something wrong while I was opening the issue.
### Problem
I've got the Raspberry Pi 3 B+ on this Monday and since then I'm fighting the f…
-
I posted something about this in the Community Forum, but I hope it will get better visibility here.
At the moment zha network has seven light bulbs, three door sensors, and one switched outlet. T…
-
Délai d’attente de la demande dépassé.
Délai d’attente de la demande dépassé.
Délai d’attente de la demande dépassé.
Délai d’attente de la demande dépassé.
Délai d’attente de la demande dépassé.
…
-
Add detection of Raspberry Pi 3B+.
-
Hello,
I just try Oriental Legend plus, the graphics are 100% ok and the game speed too. But the sound is almost completely mute..no intro sound when the PGM Logo scroll down at the beginning and j…
-
This is probably related to #963 and possibly #941.
I have an environment running with ~65 pi 1B and ~10 pi 2B, all netbooted with bootcode.bin on the SD card. I am now working on introducing pi 3B…
-
No output on serial on boot
But looks like there is a new dtb
```
bcm2710-rpi-3-b-plus.dtb
```