-
I notice when using RPITX to transmit that after its done my system audio crashes no sound nothing. On top of that my buttons connected to the GPIO pins no longer respond. Is there are work around for…
ghost updated
6 years ago
-
Hello
I would like to use my old pager to receive mail and message notifications around my house.
Can this software be used for POCSAG message transmission?
Many thanks in advance
-
There is no tutorial showing how to make am signals
Also i try to convert a wav file and it say me tha it is not 48k sample rate WHY THERE IS NO HELP
-
On rpi2 and rpi3 I have problem with setTime.py
I connected GPIO18-GND to series resonant LC antenna,
Carrier is great, 77.5 kHz precise to 4 decimals, and can be
cleanly received by the clock …
emard updated
5 years ago
-
I've captured some AM ASK/OOK signals with an SDR and Audacity. What do I need to do to get these to play back on the same frequency as AM?
I'm trying this and I see a signal in SDR# but it's not s…
-
In the Readme.md usage you say:
> -f float frequency to output on GPIO_18 pin 12 in khz : (130 kHz to **750 MHz**),
Is [this](https://github.com/F5OEO/rpitx/blob/master/src/RpiTx.c#L979) a typ…
E3V3A updated
6 years ago
-
Hi. I trying tuning IF in my receiver and need HF generator tuning on 10.7 mhz. Signal must be nomod. How I can use ur program for my goal?
In additional. I found some problem with transmit on rpi …
-
When hosted on a Raspberry Pi the sdrdaemontx should be able to use the PiTx code in order to use the RPi as a general purpose transmitter.
PiTx can be found here: https://github.com/F5OEO/rpitx
f4exb updated
6 years ago
-
There is some installation error in the installation of rhe v2 beta branch :
`imagemagick is already the newest version (8:6.9.7.4+dfsg-11+deb9u6).
0 upgraded, 0 newly installed, 0 to remove and 7 …
-
Hi, thanks for sharing this great project!
I discover that it officially doesn't have support for the A+ model. Why is that? because of memory? do you think there is going to be A+ version working on …