-
I don't know exactly what I'm doing, but I'm trying to learn. I cracked open the fused controller case for these lights (15 bulbs) and managed to extract the firmware using my Flipper Zero as a USB-UA…
dcode updated
10 months ago
-
DietPi version |
G_DIETPI_VERSION_CORE=8
G_DIETPI_VERSION_SUB=1
G_DIETPI_VERSION_RC=2
G_GITBRANCH='master'
G_GITOWNER='MichaIng'
G_LIVE_PATCH_STATUS[0]='applied'
G_LIVE_PATCH_STATUS[1]='applied…
-
Documentation: [here!](https://rust-console.github.io/gbatek-gbaonly/#saved-program-status-registers-spsr_mode)
-
https://docs.radxa.com/en/zero/zero3
Serial Port Baud Rate: `1500000 8N1`
![PXL_20240703_190926427 MP](https://github.com/meta-flutter/meta-flutter/assets/12262875/ceb573e6-1626-42d3-a976-a5d855…
-
I have an iot-3399e board with Kernel 4.19 the board is rebooting after about 10min, the CPU Temp is at ~65C. The DTS is from a running ubuntu image with the same kernel version.
There is no error on…
-
**Device Information | 设备信息**
- SOC: [e.g. rk3328]
- Model [e.g. chainedbox]
**Armbian Version | 系统版本**
- Kernel Version: [e.g. 5.15.100]
- Release: [e.g. noble]
**Describe the bug | 问题描…
-
`mm_unprotected_ipa_boundary` testcase is failed because of Data abort in realm.
let me check the issue in this page
```bash
// eom: mm_unprotected_ipa_boundary start
[TRACE]islet_rmm::event --…
-
I am trying to attempt to build a verified boot solution using Flattened Image Trees on a Raspberry Pi 3B +
I have looked at a couple of guides online about how to do this, however they seem quite ou…
-
### Bug description
Fixed by iommu=pt - please close this issue.
Device IoScale 3.2tb is detected, but not attached - see snippet from dmesg
[ 8.227469] fioinf Copyright (c) 2006-2014 Fusion…
-
Similar to issue #335, bcm43436b0 on the Pi Zero 2 W dies immediately after doing a few successful injections. Here is my process and forensic data:
1. Fresh install of old stable buster lite (5.10…