-
I've had a glance around the wiki and I haven't been able to find anything, which makes me think this isn't supported.
My concept is to run two of the Adafruit 2.2" displays (http://www.adafruit.com/…
-
I'm trying to adapt https://github.com/cnlohr/ws2812esp8266 for use with the Arduino IDE, but I keep running into this error: section `'.text' will not fit in region 'iram1_0_seg'`
I'm using the late…
-
Hi,
Sorry about raising this as an issue — I didn't find any other ways to contact you.
It looks like you have some real experience with SSD1331 and SSD1332 OLED controllers (and probably some more)…
-
http://www.ebay.com/itm/0-95inch-RGB-OLED-Display-Module-A-96-64-SSD1331-4wire-SPI-65K-Colorful-curved-/251867862618
SSD 1331
0.95inch-RGB-OLED.7z
-
Hi,
Im using the library together with the 0.96" 16-bit Color OLED with the SSD1331 driver chip. I looked for a way to get the current cursor position and couldn't find one. So should these two be pub…
-
Hi, I'm working on a Raspberry Pi project featuring this small OLED ( https://www.adafruit.com/product/1431 ).
I can't seem to find any driver for this display for the Raspberry pi, but when I asked o…
-
Having an issue-- found it with both 3.14.58 and 4.1.15 so it must be systemic?
Hardware:
Beaglebone black with USB wireless (Novatel USB760).
I'm running a simple script that sends an "AT" to the …
-
The FBTFT framebuffer drivers for small LCD displays, is now accepted in the staging tree:
https://git.kernel.org/cgit/linux/kernel/git/gregkh/staging.git/tree/drivers/staging/fbtft?h=staging-testing
…
notro updated
9 years ago
-
Cannot find RA8875 promised device using "sudo modprobe fbtft_device name=list".
Installed 2014-06-20-wheezy-raspbian-2014-07-25-fbtft-master-firmware, then sudo REPO_URI=https://github.com/notro/rpi-…
-
The README.md of library #127 (ESP8266) states:
This library has been discarded. A new library named WeeESP8266 is recommended, which is more easy-to-use for users.
WeeESP8266 can be downloaded at ht…